The cable stopper is designed for CLICK RAIL wall and ceiling profiles. It is perfect for places where the profile is installed at an angle. The maximum angle of inclination is 45 degrees. It consists of two parts - a stopper and a threaded fastener. Installation is very simple - the stopper is inserted into the profile through its side, pushed to the desired place where the cable should stop and screwed with a hex key. In this way, the position is fixed. One stopper can withstand a maximum weight of up to 4 kg.

If the picture is heavy, you can use two or three units for better stopping. When mounted one next to the other, the maximum holding weight is added up. For example, two stoppers withstand 8 kg. If the frame is hung on two cables, its weight is divided by two. Let's say the picture weighs 15 kg and is hung on two cables. This means that one cable requires two stoppers (four for a picture).

The brake can also be used as a cable lock - for example, you can fix the position of the cable between two brakes.

• Stopper dimensions: 6 x 6 x 6 mm
• Thread lock dimensions: 2 x 2 x 6 mm
• Hex key: 1 mm
• Braking up to 45 degrees
  
• Braking up to 4 Kg

This set includes:

• stopper - 1 pc.