X-10 Stands

Stand system X-10 CROSS wire is a mobile Danish-made exhibition stand system (also called a structure or a farm), whose beam dimensions are 10x10 cm. The construction is very simple - the beams and soles are connected to the cube, and an X-joint is used to connect the beams to each other. The poster is stretched with the help of straps. We provide rental, installation and transport services - Ask.

STAND POSTER MANUFACTURING LOWEST PRICES - compared to other stands, printing on a cast tarp is produced the cheapest! Ask about the use of other desired materials. Stand posters can be with or without graphic printing (white color). Posters without printing are half the price, they are mostly used to separate stand partitions or internal rooms. It is also a great way to hang or pin your own posters, photos or relevant information. It can be attached with pins, double-sided adhesive tape or stationery plasticine.

Blockout posters are a material that does not transmit light at all. It is used when the back of the stand is placed near the window so that the sun's rays do not shine through the poster. Also if the lights shine from the back.

• Structural beams from 10 cm to 200 cm.
• Beam steps: every 10 cm
  
• The thick part of the beam: Ø 12 mm
• The thin part of the beam: Ø 6 mm
• Composition: 70% aluminum, 30% plastic.
• Weight (average): 0.9 Kg / m
• Colors: black, white, gray

• Use: indoors, outdoors only when firmly established in a shelter
  
• Recommended total horizontal beam length: up to 3 m
  
• Recommended total stand height: up to 6 m
• Storage (volume): 100 meter beams / m³
• Poster hanging: fastening straps, elastics, metal bands + holders
• Installation tools: ladder

Load Table X-10. The load is calculated on a horizontal beam, which is connected by two cubes and placed on two vertical beams.

Photos of completed works

Tightening nylon straps (thin 15-20 cm long are recommended) can be used to fasten the posters - they can be purchased additionally. To remove the poster, we recommend using pliers to cut the straps quickly and safely. Using a knife, you can cut into a poster or structures.

Prefab, mobile transport boxes (more info here...)

Examples of stands with prices and detailed information: